RJM-FLT-001 | Rijomac Filter Selection

RIJOMAC SYSTEM

Controlled Environment Engineering

RJM-FLT-001 v3.0

RJM-FLT-001 • Version 3.0 • Rebuild

Filter Selection Engine

Project Input Calculation Result Report

1. Project Information

Project Name

Area / AHU

Engineer

Date

Engineering Notes

Filter selection for preliminary engineering. Verify final selection with manufacturer data sheet, filter test standard, holding frame leakage, gasket condition, and project specification.

2. Filter Selection Input

Application Preset Custom Comfort HVAC Hospital HVAC Cleanroom ISO 8 Cleanroom ISO 7 HEPA Terminal Exhaust HEPA / Isolation

Airflow Unit m3/h CFM L/s

Airflow

Target Face Velocity (m/s)

Filter Width (mm)

Filter Height (mm)

Filter Stages

Stage 1

Stage 2

Stage 3

Pressure Drop Mode Final / Dirty Filter Initial / Clean Filter Average

Operating Hours / Day

Dust Loading Level Low Medium High

Ready.

3. Filter Selection Result

Required Face Area-

Filter Module Area-

Recommended Qty-

Actual Face Velocity-

Total Filter Area	-
Initial Pressure Drop	-
Final Pressure Drop	-
Used Pressure Drop	-
Filter Chain	-
Lifetime Estimate	-
Engineering Check	-

Filter Chain Visualization

Engineering Note:
Pressure drop final filter penting untuk fan ESP. Untuk cleanroom dan hospital, cek seal, gasket, holding frame, leakage, dan test certificate sesuai kebutuhan proyek.

4. Engineering Report

5. Filter Library Reference

Class	ISO / MERV Reference	Typical Use	Initial PD	Final PD

RJM-FLT-001 v3.0 • Rijomac Engineering Center • Filter Selection Engine

Tweet